Fractal Water Imploder

Fractal Water Super Imploder

The Super Imploder is the most effective (implosive) way to get increased ‘bio-availability’.


Revitalized water can be achieved quickly and easily.

Less amount of water is required for plant growth.

Cost effective.

Uses established infrastructure.

Measurable and repeatable increase in germination rate.

Increase in nutritional density.

Increase in stem width, leaf size, and plant height.

Sustainable, eco-friendly.

No moving parts, minimal wear and tear, No ‘parts’ to replace or dispose of.

Increases bottom line for all users.

Third world communities will have a cost effective means for improving farming methods, increasing food yields and purifying water.

Accelerated plant growth for hydroponics, greenhouse and all crops from agricultural operations.

Landscape Gardens.

Water treatment for the food industry (taste/appearance/nutritional density).

Brewery, distillation, winery, and biomass fuel industries.

Domestic use to purify and re energize town-supplied water.


Wheat Treated with fractal water Right, Without Left. 

Thread Sizes: 3/4 in (corresponds to metric also)- male one end, female the other

Direction of water flow: Water always ENTERS in nozzle end (the spin from the nozzle motorizes the molecule as it enters the conjugating magnetics)- and exits the magnet end.

Pressure: Normal house pressures ok- nominal is on 20 psi, off 40 psi. However the Technyl material design etc can handle at least 50-80 psi.

Flow rate: The magnet array is 3/4 inch pipe, the nozzle restriction is down to about 3/8 to 7/16 inch. Flow rate is calculable based on diameter vs. the pressure you have- see more on this on the physics page.

Cleaning: the nozzle is removable and can be dissembled for cleaning- and the pipe is open and clear inside the well protected super-magnet enclosure. In normal – even cloudy water- cleaning should be rarely necessary.

Rated for what liquids: although primarily designed for water – agriculture- and drinking- based on solubility increase- the materials of the Super Imploder CAN handle even mildly corrosive materials ( the liquid touches only super Technyl and tough CPVC).

Construction: The Super Imploder Vortex Nozzle is made from Super Technyl Plastic – So strong it replaces metal! The Magnetic array housing is PVC Schedule 40, and the inner pipe on the magnetic array is made from CPVC Schedule 80.

Magnets: Our magnets are totally self contained, these magnets, though powerful are shielded with 10 gauge steel to maintain flux density within the pipe, and not outside where it can interfere with other equipment.

The Super Imploder uses 3/4″ high grade CPVC for strength and heat resistance. The fittings are CPVC pipe fittings, which is different than hose fittings, please use a pipe to hose fitting adapter for use with a hose.

The magnetic housing (the white part) is heavy at nearly 13 lbs, please support the magnetic housing with 3″ pipe hangers. This ensures that excess stress is not applied between the Imploder Vortex Nozzle and the Magnetic Array.

NOTE: Not to be installed in the Home incoming water line.

To increase seed germination success- farmers can simply spray water with the Super Imploder attached onto a hose. Running the imploded water thru a sprinkler system is easy.
Field crops, Green House, Wineries, Hydroponics, Flower growers etc.
The Super Imploder creates faster growth rate and denser biomass, stronger disease resistant crops, all of which increases the bottom line profits.

All Prodcuts...

All Prodcuts...